Automobile parts

Air duct interface

• Material: PP+EPDM-T20
• Color: Black as standard
• Significantly improved low-temperature toughness (maintains good impact resistance at -30℃), ideal for vehicles in frigid regions.
• Excellent sound insulation and vibration damping with EPDM rubber, enhancing in-car quietness.
• Talc-filled reinforcement boosts rigidity, reducing the need for ribs and simplifying mold design.

EV Charging Parts

• Core Components: Plug housing, terminal sleeve, seal base, mounting clip
• Main Materials: Flame-retardant ABS/PC alloy, glass fiber-reinforced PP, PBT+GF (for high-temperature areas) — all comply with UL94 V0 flame-retardant standard
• Key Performances: Weather-resistant (-40℃~85℃), UV-resistant, leakage-proof, protection class ≥IP65; adapted to high-current heat dissipation requirements, dimensional accuracy up to ±0.05mm
• Core Values: Ensure electrical safety, compatible with CN/EU/US standard plug structures, meet the requirements of injection molding mass production and assembly consistency

EV Charging Parts

• Core Components: Plug housing, terminal sleeve, seal base, mounting clip
• Main Materials: Flame-retardant ABS/PC alloy, glass fiber-reinforced PP, PBT+GF (for high-temperature areas) — all comply with UL94 V0 flame-retardant standard
• Key Performances: Weather-resistant (-40℃~85℃), UV-resistant, leakage-proof, protection class ≥IP65; adapted to high-current heat dissipation requirements, dimensional accuracy up to ±0.05mm
• Core Values: Ensure electrical safety, compatible with CN/EU/US standard plug structures, meet the requirements of injection molding mass production and assembly consistency

Connector

• Core Components: Plug housing, terminal sleeve, seal base, mounting clip
• Main Materials: Flame-retardant ABS/PC alloy, glass fiber-reinforced PP, PBT+GF (for high-temperature areas) — all comply with UL94 V0 flame-retardant standard
• Key Performances: Weather-resistant (-40℃~85℃), UV-resistant, leakage-proof, protection class ≥IP65; adapted to high-current heat dissipation requirements, dimensional accuracy up to ±0.05mm
• Core Values: Ensure electrical safety, compatible with CN/EU/US standard plug structures, meet the requirements of injection molding mass production and assembly consistency

Dust Cap

• Function: Blocks dust/moisture, prevents short circuits/contact failure, optional locking design
• Materials: TPE/soft rubber, ABS/ASA (UV-resistant), PLA (indoor use)
• Compatibility: GB/EU/US standards (IEC 62196-2/J1772, etc.)
• Value: Protects terminals, extends service life, ensures charging safety

EV charging plug

• Function: Supports and positions charging terminals; isolates conductive components of each pole to ensure electrical insulation.
• Structure: Multi-hole design adapts to the layout of charging pins; equipped with mounting clips/fixed bases for easy assembly with the plug housing.
• Materials: Typically flame-retardant PBT+GF, or PA66+GF — all meet UL94 V0 flame-retardant standards, and offer high/low temperature resistance and electrical insulation.
• Core Value: Ensures precise alignment and safe isolation of charging terminals; it is a critical structural component for the electrical safety of charging plugs.

Rearview Mirror Housing

• Function: Protects internal mirror components (e.g., lens, motor); serves as an exterior body part to maintain consistent vehicle styling.
• Structure: Features buckle/claw structures matching the vehicle-specific mirror base; surface finished with painting (or injection-molded original color).
• Materials: PC/ABS alloy (superior impact resistance) is used for some premium models.
• It must meet requirements for weather resistance (UV/thermal stability) and impact durability.

EV Charging Handle (two-piece cover)

EV Charging Handle Plastic Housing: PC/ABS flame-retardant alloy, UL94 V0 rated, withstands -40℃~85℃, resists UV/impacts, complies with RoHS/REACH. Rigorously tested (≥10,000 insertion/extraction cycles, ≥48-hour salt spray), it boasts robust structure, excellent compatibility for precise internal component fit. Custom post-processing (painting, silk screening, laser engraving, assembly) available. Suitable for public fast-charging stations, offering consistent quality, timely delivery, and long-term safe reliable operation of charging equipment.

EV Charging Handle (one-piece cover)

EV Charging Handle Plastic Housing: PC flame-retardant alloy, UL94 V0 rated, withstands -40℃~85℃, resists UV/impacts, complies with RoHS/REACH. Rigorously tested (≥10,000 insertion/extraction cycles, ≥48-hour salt spray), it boasts robust structure, excellent compatibility for precise internal component fit. Custom post-processing (painting, silk screening, laser engraving, assembly) available. Suitable for public fast-charging stations, offering consistent quality, timely delivery, and long-term safe reliable operation of charging equipment.